CENTRIFUGAL PUMP PROLAC SWFI

PROLAC SWFI

Application

• The SWFI pump is a centrifugal pump that complies with the highest hygienic requirements of the pharmaceutical industry.
• Its main application is the loops of de-mineralised water of various pharmaceutical qualities.

Operating principle

• The operating principle is the one of the centrifugal pumps. Allowing to maintain the water purity in the circuit the pump is completely drainable, the parts of the pump resist the passivation system and the rigorous CIP/SIP processes.
• If a double seal is installed, the sealing barrier is the sterile water of the process, the flow of which is regulated with a needle valve.

Design and features

• The pump outlet is at 45° with the ½” clamp drain port.
• Clamp connections (standard).
• Open type investment casting impeller.
• Interior surface finish Ra<0.5μm.
• Hygienic mechanical seal.
• 3A certified pump.
• Robust cast lantern.
• Motors: IEC B5, IP55, F class insulation.

Materials

• Parts in contact with the media AISI-316L
• Lantern/Tripod AISI-304
• Gaskets (standard) EPDM according to FDA
• Mechanical seal (standard) single SiC/TungC/EPDM

 

Download (Pdf) – Prolac SWFI Centrifugal Pumps

KIBER KS Progressive Cavity Pumps

Cavity Pumps

Application

The KS/KST/KSF pumps are sanitary progressive cavity pumps. Due to the design, they are self-priming and reversible pumps that can suction from a maximum height of 7 meters. These types of pumps transfer products of low and high viscosity as well as products containing particles.

They are widely used to pump edible oils, wine, concentrates and beverages in general as well as viscous food products such as jam and marmalade, pasta, pâté, melted cheese, etc. In the cosmetics industry, these pumps are used in applications involving various cosmetic products such as soap, gels and creams.

Operating principle

• Friction between the rotor and the stator creates a vacuum in the inlet area thereby helping the entry of the product into the pump.
• The turning motion of the rotor makes the cavities between the rotor and the stator move forward and transport the product to the outlet.

Design and features

• Bare shaft or close-coupled construction, model with hopper.
• EN 12756 L1K single internal mechanical seal.
• DIN 11851 standard connections.
• Open transmission (hygienic design).
• Painted white.
• 3A certified pump.
• Excentric outlet.

Material

• Parts in contact with the product – AISI 316L
• Other stainless steel parts – AISI 304
• Lantern and bearing support – GG-25
• Stator – Black NBR (according to FDA 177.2600)
• Gaskets – NBR (according to FDA 177.2600)
• Mechanical seal – Cer/C/NBR
• Internal surface finish – Ra ≤ 0,8μm
• External surface finish – bright polish

 

Download (Pdf) –  KIBER KS PROGRESSIVE CAVITY PUMP

SLR Lobe Rotor Pumps

SLR LOBE ROTOR PUMP

Applications

• The SLR pump is a lobe rotor positive displacement pump of a sanitary design suitable for use in the dairies, food-processing, beverage, pharmaceutical and fine chemicals industries.
• This pump is perfect for managing all kinds of fluid, of either low or high viscosity, in the food-processing, dairies, and cosmetics industries, as well as for filtering and bottling applications. Fluids containing fragile solids such as junket can be pumped without damage thanks to the specially designed lobes.

Operating principles

• The SLR pumps basically consist of two lobe rotors which rotate synchronously inside a casing without touching each other.
• As the rotors rotate, the spaces between the lobes and the casing are successively filled with fluid, which is transported to the discharge nozzle with a fixed amount of displacement. The pumped fluid forms a continuous stream thanks to the tolerances between the lobes and the pump casing, thus ensuring an efficient pumping.

Design and features

• Bare-shaft construction.
• Casing and rotors in stainless steel investment casting technology.
• Tri-lobe rotors.
• Health-safe design of the attachment of the rotors.
• DIN connections (standard).
• Sanitary mechanical seals.
• Easy cleaning and maintenance.
• Pump certified according to 3A sanitary standards.

Materials

• Parts in contact with pumped media – AISI 316L
• Support – GG-15
• Gaskets (standard) – EPDM (FDA)
• Mechanical seals (standard) – C/SiC/EPDM
• Inside surface finishing – Ra < 0.8μm.
• Outside surface finishing – Mirror polished

 

Download (Pdf) – SLR LOBE ROTOR PUMP

PROLAC SA SELF-PRIMING PUMP

SELF-PRIMING PUMP

Application

• The Prolac SA pump is a centrifugal pump specially designed to pump liquids containing air or gas without losing its pumping power. It can be used in the food-processing, pharmaceutical and chemical industries.
• It can also be used with wine, oil, syrups, volatile products such as alcohol, acetone and other solvents, or with products at temperatures close to boiling point.
• However, the main use of this pump is for CIP return.

Operating principle

• The Prolac SA pump is a self-priming pump which does not require the use of a vacuum pump or other devices such as a foot valve or additional piping.
• The pump must be primed with liquid only once before starting-up. When it is operated, the pump suctions the air or gas present inside the suction pipe and mixes it with the fluid inside the pump casing. The centrifugal force drives the liquid-gas mixture to the higher part of the casing. Due to the large dimensions of the casing, the fluid looses the speed and the air is expelled through the drive pipe.
• Thus, the air is eliminated along the suction pipe before the liquid reaches the pump casing and then the pump operates as normal centrifugal pump.
• It is very important that the suctioned air can escape when running along the discharge pipe without being subject to any kind of counter-pressure.
• Users are strongly advised not to reduce the hydraulic power of the pump by reducing the size of the impeller or reducing the speed of the motor by means of a frequency converter since this would affect the suction power of the pump.

Design and features

• Welded casing manufactured in cold-formed plate.
• Very robust stainless steel lantern.
• Open investment cast impeller.
• DIN connections.
• Sanitary mechanical seal.
• Check valve in the suction nozzle to avoid siphoning when the pump stops.

Materials

• Parts in contact with the product – AISI 316L
• Other parts – AISI 304
• Gaskets EPDM according to – FDA 177.2600
• Mechanical seal – St.St./C/EPDM
• External surface finish – bright polish

 

Download (Pdf) – PROLAC SA SELF-PRIMING PUMP

ASPIR Self-Priming Pumps

Applications

• The Aspir pump is a sanitary, side-channel, self-priming pump suitable for use in the food-processing, pharmaceutical and chemical industries.
• It is specially designed for pumping materials containing air or gas, and it can also be used for negative suction with prior priming as well as with filtration equipment.
• It can be used with wine, oil, syrups, volatile products such as alcohol, acetone and other solvents, or with products at temperatures close to boiling point.
• However, the main use of this pump is for CIP return.

Operating principles

The impeller is housed between the inlet body and the venturi casing and it rotates in conjunction with the pump shaft.This arrangement, together with the rotation of the impeller and the arrangement of the side channel, creates a negative pressure inside the inlet body, which generates the suction force of the pump. At the same time, the fluid receives energy in the form of kinetic energy and pressure energy, and this impels it through the impeller casing.

Design and features

• Casing manufactured with cold-formed plate.
• Stainless steel investment casting inletbody and venturi.
• Star-shaped floating impeller manufactured with investment casting technology.
• External mechanical seal that prevents contact between the springs and the pumped fluid.
• Very robust stainless steel-cast lantern.
• Pump support of stainless steel.

Materials

• Parts in contact with pumped media – AISI -316
• Other parts – AISI-304
• Gaskets (standard) – EPDM (FDA)
• Mechanical seal (standard) – C/SiC/EPDM
• Surface finishing – Electro polished

 

Download (Pdf) – ASPIR SELF-PRIMING PUMP

Estampinox EFN Centrifugal Pumps

Centrifugal Pumps

Applications

• The Estampinox EFN pump is a centrifugal stainless-steel pump suitable for motor assembly according to the USA NEMA stantards.
• It is designed to cater for the needs of all the auxiliary services in the food-processing, chemical, pharmaceutical, and wine-making industries, among others.

Operating principles

• Housed inside the casing, the impeller rotates in conjunction with the pump shaft .With this arrangement, the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.
• This pump is not reversible by simple reversal of the direction of rotation. The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.

Design and features

• Casing manufactured with cold-formed plate.
• Clamp connections (standard).
• Open impeller manufactured with stainless steel cold-formed plate
  or investment casting (according to model).
• Inside mechanical seal.
• Simple parts and easy maintenance.

Materials

• Parts in contact with pumped media – AISI 316L
• Gaskets (standard) – VMP (Silicone)
• Mechanical seal (standard) – Cer/ C /NBR
• Lantern – GG-15
• Surface finish – Electropolished

 

 

Estampinox EFI Centrifugal Pumps

EFI CENTRIFUGAL PUMP

Applications

• The Estampinox EFI pump is a stainless-steel centrifugal pump for decanting water and other fluids.
• It is designed to cater for the needs of all the auxiliary services in the food-processing, chemical, pharmaceutical, and wine-making industries, among others.

Operating principles

• Housed inside the casing, the impeller rotates in conjunction with the shaft.
  With this arrangement, the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.
• The pump is not reversible by simple reversal of the direction of rotation. The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.

Design and features

• Casing manufactured with cold-formed plate.
• BSP/GAS connection (standard).
• Open impeller manufactured with stainless steel cold-formed plate or investment casting (according to model).
• Inner mechanical seal.
• Simple parts and easy maintenance.
• Motor according to IEC B34 standards.

Materials

• Parts in contact with pumped media AISI 316L
• Other parts AISI 304
• Gaskets (standard) – VMQ (Silicone)
• Mechanical seal (standard) – Cer/C/NBR
• Surface finish Electro polished

 

Download (Pdf) – ESTAMPINOX EFI CENTRIFUGAL PUMP

Estampinox EFH Centrifugal Pumps

CENTRIFUGAL PUMP

Applications

• The Estampinox EFH pump is a stainless steel centrifugal pump with a steel lantern for decanting water and other fluids.
• It is designed to cater for the needs of all the auxiliary services in the food-processing, chemical, pharmaceutica, wine-making industries, etc.

Operating principles

• Housed inside the casing, the impeller rotates in conjunction with the pump shaft.
• With this arrangement, the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.
• This pump is not reversible by simple reversal of the direction of rotation. The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.

Design and features

• Casing manufactured with cold-formed plate.
• BSP/GAS connections (standard).
• Open impeller manufactured with stainless steel cold-formed plate
  or investment casting motor according to model.
• Inside mechanical seal.
• Simple parts and easy maintenance.
• IEC B35 motors (B34 for EFH-200), IP55, F-class insulation.

Materials

• Parts in contact with pumped media  – AISI 316L
• Lantern – GG-15
• Other parts – AISI 304
• Gaskets (standard) – VMQ (Silicone)
• Mechanical seal (standard) – Cer/C/NBR
• Surface finish – Electroplished

 

Download (Pdf) – ESTAMPINOX EFH CENTRIFUGAL PUMP

HYGINOX SN CENTRIFUGAL PUMP

CENTRIFUGAL PUMP

Applications

• The Hyginox SN pump is a centrifugal stainless-steel pump suitable for motor assembly according to the USA NEMA stantards.
• This pump is specially designed for the dairies, beverages, and food-processing, as well as CIP supply and auxiliary services in the chemical industry.

Operating principle

• Housed inside the casing, the impeller rotates in conjunction with the pump shaft.
• With this arrangement, the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.
• This pump is not reversible by simple reversal of the direction of rotation. The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.

Design and features

• Casing manufactured with cold-formed plate.
• Clamp connections.
• Open impeller manufactured with stainless steel investment casting technology.
• Mechanical seal according to DIN 24960 L1K.
• Pump certified according to 3A sanitary standards.
• Suitable for NEMA-C motors.

Materials

• Parts in contact with pumped media – AISI 316L
• Other parts – AISI 304
• Gaskets (standard) – EPDM (FDA)
• Mechanical seal (standard) – C/SiC/EPDM
• Lantern – GG-15
• Inside surface finishing – Ra < 0.8μm
• Outside surface finishing – Mirror polished

Hyginox SH Centrifugal Pumps

CENTRIFUGAL PUMP HYGINOX SH

Applications

• The Hyginox SH pump is a centrifugal pump manufactured in stainless steel with steel lantern.
• This pump is specially designed to meet the requirements of applications such as filtering, bottling, CIP supply, and auxiliary services in the chemical industry.

Operating principle

• Housed inside the casing, the impeller rotates in conjunction with the pump shaft.
• With this arrangement, the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.
• This pump is not reversible by simple reversal of the direction of rotation. The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.

Design and features

• Casing manufactured with cold-formed plate.
• DIN connections (standard).
• Open impeller manufactured with stainless steel investment casting technology.
• Mechanical seal according to DIN 24960 L1K.
• Pump certified according to 3A sanitary standards.
• Motor according to IEC B35 standards.
• IEC B35 motors (B34 for SH-15), IP55, F-class insulation.

Materials

• Parts in contact with pumped media – AISI 316L
• Gaskets (standard) – EPDM (FDA)
• Mechanical seal (standard) – C/SIC/EPDM
• Lantern – GG-15
• Inside surface finishing – Ra < 0.8μm
• Outside surface finishing – Mirror polished