Horizontal centrifugal pump to EN 733 (DIN 24255).
Features –
- Standardized and modular design.
- Flanges according to ISO 7005 PN 16.
- Outstanding hydraulic performance.
- High efficiency impeller.
- Closed impeller with back vanes providing axial balancing of impeller loads.
- Easy maintenance through the Back-Pull-Out principle.
- Single unbalanced / balanced seals to EN 12756 (DIN 24960).
- Single and double cartridge seals with seal support system.
- Quenched shaft sealing.
- Gland packing.
- Atex certification.
- Dry-shaft design, pumped liquid not in contact with the shaft.
- Robust shaft design.
- Extended life time.
- 2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing.
- Grease or oil bath lubricated bearings.
- Suitable for – Low viscosity, clean or slightly contaminated liquids.
Technical data –
- Casing : Cast iron, Nodular cast iron, Bronze
- Impeller : Cast iron, Bronze
- Max. capacity : 1 500 m3/h
- Max. delivery head : 140 m
- Max. liquid temperature : -30 up to 200°C
- Max. operating pressure : 1000 kPa (10 bar)
- Max. speed : 3 600 rpm
Download (Pdf) – CombiNorm
