Horizontal centrifugal pump to ISO 2858 (EN 22858(DIN 24256)) and ISO 5199.

Features

• Standardized and modular design.
• Flanges according to ISO 7005 PN 16.
• For stainless steel execution 150 lbs ANSI B 16.5 available.
• Outstanding hydraulic performance.
• High efficiency impeller.
• Closed impeller with back vanes providing axial balancing of impeller loads.
• Half open impeller with wear plate and external adjustment.
• Easy maintenance through the Back-Pull-Out principle.
• Single unbalanced / balanced seals to EN 12756 (DIN 24960).
• Single and double cartridge seals with seal support system.
• Quenched shaft sealing.
• Atex certification.
• Dry-shaft design, pumped liquid not in contact with the shaft.
• Heating jacket optional.
• Robust shaft design.
• Extended life time.
• 2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing.
• Grease or oil bath lubricated bearings.
• Suitable for – Low viscosity, clean or slightly contaminated liquids, especially in the chemical industry.

Technical data

• Casing : Cast iron, Nodular cast iron, Bronze, Stainless steel
• Impeller : Cast iron, Bronze, Stainless steel
• Max. capacity :  800 m3/h
• Max. delivery head : 160 m
• Max. liquid temperature : -50 up to 250°C
• Max. operating pressure : 1600 kPa (16 bar)
• Max. speed : 3 600 rpm

Download (Pdf) – Centrifugal Pump CombiChem Series