Centrifugal Pump CombiBloc Series

Horizontal centrifugal pump to EN 733 (DIN 24255)

Features –

  • Standardized and modular design.
  • Flanges according to ISO 7005 PN 16.
  • Outstanding hydraulic performance.
  • High efficiency impeller.
  • Closed impeller with back vanes providing axial balancing of impeller loads.
  • Easy maintenance through the Back-Pull-Out principle.
  • Single unbalanced / balanced seals to EN 12756 (DIN 24960).
  • Single and double cartridge seals with seal support system.
  • Quenched shaft sealing.
  • Gland packing.
  • Atex certification.
  • Dry-shaft design, pumped liquid not in contact with the shaft.
  • Robust shaft design.
  • Extended life time.
  • 2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing.
  • Grease or oil bath lubricated bearings.
  • Suitable for -Low viscosity, clean or slightly contaminated liquids.

Technical data

  • Casing : Cast iron, Nodular cast iron, Bronze, Stainless steel.
  • Impeller :  Cast iron, Bronze, Stainless steel.
  • Max. capacity : 850 m3/h.
  • Max. delivery head : 105 m.
  • Max. liquid temperature :  120°C.
  • Max. operating pressure : 1000 kPa (10 bar).
  • Max. speed : 3 600 rpm.

 

Download (Pdf) – Centrifugal Pump CombiBloc Series